Move one screen and the other two stay put.
Each monitor rides its own extrusion, so raising or lowering one leaves the other two where they are.
Triple Monitor Stand
Three screens, set once, adjusted one at a time.
| Freestanding | Fits any rig |
|---|---|
| Center display | 27–42″ or 42–65″ |
| Curved screens | Supported |
| VESA | 75 × 75 · 100 × 100 mm |
| Colors | 10 × 10 |
| Assembly | Two people, one afternoon |
Total
In Korea, SPEC is sold by Rotex Lab We don't ship to Korea ourselves. Order through our partner Rotex Lab.
Order from Rotex LabPreorders are paid in full and refundable any time before your run's cutoff date.
The side arms stay level under load.
Two legs carry the load, and a tensioned cable holds each side arm level.
Within a size band, bigger screens need no new parts.
The width adapts to the screens. Moving from 27–42″ to 42–65″ swaps six extrusions: every horizontal bar, including the two longer floor legs. Everything else carries over.
Change an angle and the alignment holds.
A CNC hinge ties each side arm straight to its post. Swing it, and nothing else moves.
Alignment Kit ×3
A perfect stand still needs the last millimeter.
Monitor backs and VESA holes carry tolerance of their own. The kit takes it out: lean, shift and rotate, one screen at a time.
$119.99 for three, one per screen.
Running a Samsung 55″ Odyssey Ark? The ARK plate converts its back to standard VESA: $109.00 for three, on the 42–65″ stand.
Install, start to finish.
The full build in one video. Two people, one afternoon.
See the full assembly guide → (opens in a new tab)Manual, 27–42 in. (PDF) ↓ (opens in a new tab)Manual, 27–42 in. (PDF) ↓ (opens in a new tab)Manual, 42–65 in. (PDF) ↓ (opens in a new tab)Manual, 42–65 in. (PDF) ↓ (opens in a new tab)
Specification.
Center display
27–42″ or 42–65″, pick by the center screen
VESA
75 × 75 mm · 100 × 100 mm
Curved screens
Supported
Freestanding
Stands on its own legs. The rig sits between them
Extrusion
SPEC 40 × 80 mm profile, matte anodized
Connectors
CNC-machined, matte anodized
Colors
10 main × 10 accent
In the box · 27″–42″
Main color: 4080-620 extrusions · Accent color: COVER-4080 end caps ×8, CNCT-90-4080 connectors · Abyss Black: 4080-620 ×2, 4080-1300 ×2, COVER-4080-HOOK, HINGE-A, HINGE-A+B, CNCT-90-4080-ADJ · cable kit
Main color: 4080-620 extrusions · Accent color: COVER-4080 end caps ×12, CNCT-90-4080 connectors · Uprights: 4080-820 ×4, two per upright, clamped back to back (Accent color when it is Abyss Black, Titanium Mist or Heritage Green, otherwise Abyss Black) · Abyss Black: 4080-620 ×2, COVER-4080-HOOK, HINGE-A, HINGE-A+B, CNCT-90-4080-ADJ · cable kit
In the box · 42″–65″
Main color: 4080-950 extrusions · Accent color: COVER-4080 end caps ×8, CNCT-90-4080 connectors · Abyss Black: 4080-730 ×2, 4080-1300 ×2, COVER-4080-HOOK, HINGE-A, HINGE-A+B, CNCT-90-4080-ADJ · cable kit
Main color: 4080-950 extrusions · Accent color: COVER-4080 end caps ×12, CNCT-90-4080 connectors · Uprights: 4080-820 ×4, two per upright, clamped back to back (Accent color when it is Abyss Black, Titanium Mist or Heritage Green, otherwise Abyss Black) · Abyss Black: 4080-730 ×2, COVER-4080-HOOK, HINGE-A, HINGE-A+B, CNCT-90-4080-ADJ · cable kit
Upgrade path
Within a size band the width adapts, so bigger screens need no new parts. Moving from 27–42″ to 42–65″ swaps six extrusions: every horizontal bar, including the two longer floor legs. Everything else carries over.
Fitment, by monitor.
Pick by your center screen. Every monitor we have fitted has a sheet with the stand size and the clearances.
Your monitor isn't listed? Send us the model. Contact support
Before you order.
Ask us anything else27–42″ or 42–65″?
Pick by your center screen. From 27″ to 42″, take the smaller stand; from 42″ to 65″, the larger. Two flat 42″ panels, the LG OLED42C5 / C4 and the ASUS ROG Swift PG42UQ, fit either. Not sure? The fitment sheets on this page list monitors by size and curvature. If yours isn't listed, send us the model and we'll confirm before you order.
Will it fit my rig?
Yes. The stand is freestanding: the rig sits between its legs, and nothing attaches to the cockpit. Clearances and the footprint are on the fitment sheets. It pairs naturally with a SPEC 282 and works the same way with any other rig.
Outfitting a 282 or 177 alongside it? See wheelbase and pedal fitment for both rigs on the full fitment table.
Upgrading to bigger screens later?
Within a size band the width adapts to the screens, so there are no new parts. Moving from the 27–42″ stand to the 42–65″ stand swaps six extrusions: every horizontal bar, including the two longer floor legs. The uprights, connectors, hinges and cable kit carry over.
Why is the Alignment Kit included by default?
Monitor backs and VESA holes carry tolerance of their own, so three screens on a perfectly straight stand can still sit a millimeter out. The kit takes out that last millimeter: lean, shift and rotate, one screen at a time. It's ticked by default because most triple setups end up wanting it; untick it in the configurator if you don't.
Curved monitors?
Yes. Curved and flat screens mount the same way, on a standard VESA 75 × 75 or 100 × 100 pattern.
How long does assembly take?
Plan on two people and an afternoon, about two to three hours. Faster if you've built a rig before, a little longer the first time. Follow the install video step by step.
Where does it ship from, and when?
In stock in Los Angeles: 2–4 business days of processing, then shipping on top. In stock in China: 3–5 business days, then shipping. Preorder colors ship on their run's schedule, about 60 days after the run's cutoff.
Can I cancel a preorder?
Yes. A full refund any time before your run's cutoff date.
Three screens, one stand.