Handbrake & Shifter Mount

Bolt-on handbrake and shifter mount for the SPEC 282.

From$129.00
Material6063 aluminum · 40 × 80 mm profile
FastenerM8 × 16 mm, one bolt
Warranty2 years
Pick a main and an accent color to preview the pair.

—

Main

—

Accent

Configure in 3D →
Main color

Cutoff
Shipping starts
Accent color

Cutoff
Shipping starts
Where are things shipping from?

Atelier Expected Q1 2027

What it is

Atelier is the 282 with no main-and-accent split. You choose a color for every single part, from the anodized stock we already have on the shelf.

When

We expect to open it in the first quarter of 2027.

Why not yet

Every color we make comes from a scheduled anodizing run, one tank per color, and we can't keep every color in stock at the same time. If we opened Atelier today, most builds would wait months for one missing color. We'd rather open it when we can build yours without that wait.

Leave your email and we'll let you know the day Atelier opens.

Pick two colors

Status

Shipping details

Ships from Los Angeles, CA · Shenzhen, China.

Pick two colors

$129.00

Order from Rotex Lab
Configure in 3D →
SPEC 282 handbrake and shifter mount bolted to the rig frame

Specification.

I added the Handbrake & Shifter Mount because every clamp-on shifter mount I tried either flexed under load or looked like it didn't belong. This one bolts to the 282 frame using the same T-nut system as everything else and shares the same matte-anodized extrusion, so it ties in instead of clamping on.

Position it left, right, or both, lock it down, and it stays exactly where you set it: solid contact, no flex when you're working through gears.

The crossbar and connector plate take the Main color; the end cap takes the Accent color.

(Shifter not included.)

Specifications

  • Fits: the SPEC 282 frame, using the same M8 × 16 mm bolt and T-nut system as the rest of the rig
  • Position: left, right, or both
  • Material: SPEC 40 Series matte-anodized aluminum extrusion, CNC-machined connector plate
  • Colors: crossbar and connector plate take the Main color; the end cap takes the Accent color
  • Not included: shifter or handbrake

Pairs with

Need more surface for a handbrake or button box? Stack the Handbrake & Shifter Add-On. Driving hard enough to feel any give? Add the Shift Support reinforcement brace.

Build 100% CNC Machined · Matte Anodized · Custom Extrusion · Not Powder Coat
In the box 1 × 4080 Aluminum Extrusion 620mm
1 × 8080 CNC Connector Plate
1 × 4080 Profile CNC End Caps (Set of 2)
Shipping weight 7.6 lb · 3.4 kg

Assembly.

Follow every step in 3D, or print the manual.

See the full assembly guide →Assembly manual (PDF) ↓

Drawings.

Every part in the box, dimensioned in mm. Open one for its assembly sheet.

Goes with

Bolted on? Show us the room.

See setupsSubmit yours